«
»

PAINE 14 RUDDER

THE SHAPED RUDDER

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Here’s the PAINE 14 rudder after one-half hour with 36-grit sandpaper on a Makita 7.5″ diameter grinder. The plies of the plywood serve as a guide to get everything fair and smooth. One layer of 12-oz. fiberglass cloth will be epoxied on to make it more durable.

This entry was posted on Saturday, April 21st, 2012 at 7:28 am and is filed under our yachts abuilding. You can follow any responses to this entry through the RSS 2.0 feed. You can skip to the end and leave a response. Pinging is currently not allowed.

Leave a Reply